- 797 step-by-step solutions
- Solved by professors & experts
- iOS, Android, & web

- Question : 2.1P - The e.m.f. at a thermocouple junction is 645
- Question : 2.2P - The resistance R(?) of a thermistor at temperature ? K is given by R(?) = ? exp(?/?). Given that the resistance at the ice point (? = 273.15 K) is 9.00 k? and the resistance at the steam point is 0.50 k?, find the resistance at 25
- Question : 2.3P - A displacement sensor has an input range of 0.0 to 3.0 cm and a standard supply voltage VS = 0.5 volts. Using the calibration results given in the table, estimate: (a)The maximum non-linearity as a percentage of f.s.d. (b)The constants KI, KM associated with supply voltage variations. (c)The slope K of the ideal straight line. Displacement x cm 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Output voltage millivolts (VS = 0.5)0.0 16.5 32.0 44.0 51.5 55.5 58.0 Output voltage millivolts (VS = 0.6)0.0 21.0 41.5 56.0 65.0 70.5 74.0
- Question : 2.4P - A liquid level sensor has an input range of 0 to 15 cm. Use the calibration results given in the table to estimate the maximum hysteresis as a percentage of f.s.d. Level h cm 0.0 1.5 3.0 4.5 6.0 7.5 9.0 10.5 12.0 13.5 15.0 Output volts h increasing 0.00 0.35 1.42 2.40 3.43 4.35 5.61 6.50 7.77 8.85 10.2 Output volts h decreasing 0.14 1.25 2.32 3.55 4.43 5.70 6.78 7.80 8.87 9.65 10.2
- Question : 2.5P - A repeatability test on a vortex flowmeter yielded the following 35 values of frequency corresponding to a constant flow rate of 1.4
- Question : 2.6P - A platinum resistance sensor is used to interpolate between the triple point of water (0
- Question : 2.7P - The following results were obtained when a pressure transducer was tested in a laboratory under the following conditions: I Ambient temperature 20
- Question : 2.8P - A force sensor has an output range of 1 to 5 V corresponding to an input range of 0 to 2
- Question : 2.9P - A differential pressure transmitter has an input range of 0 to 2
- Question : 2.1P - A non-linear pressure sensor has an input range of 0 to 10 bar and an output range of 0 to 5 V. The output voltage at 4 bar is 2.20 V. Calculate the non-linearity in volts and as a percentage of span.
- Question : 2.11P - A non-linear temperature sensor has an input range of 0 to 400
- Question : 2.12P - A thermocouple used between 0 and 500
- Question : 2.13P - A force sensor has an input range of 0 to 10 kN and an output range of 0 to 5 V at a standard temperature of 20
- Question : 2.14P - A pressure transducer has an output range of 1.0 to 5.0 V at a standard temperature of 20
- Question : 2.15P - A pressure transducer has an input range of 0 to 104 Pa and an output range of 4 to 20 mA at a standard ambient temperature of 20
- Question : 2.16P - An analogue-to-digital converter has an input range of 0 to 5 V. Calculate the resolution error both as a voltage and as a percentage of f.s.d. if the output digital signal is: (a)8-bit binary (b)16-bit binary.
- Question : 2.17P - A level transducer has an output range of 0 to 10 V. For a 3 metre level, the output voltage for a falling level is 3.05 V and for a rising level 2.95 V. Find the hysteresis as a percentage of span.

5out of 5Christina HoppersI have read their books earlier and this new edition Principles of Measurement Systems 4th Edition Solutions Manual helped me in providing textbook solutions. I prefer to avail their services always as they are consistent with their quality.

4out of 5Shahin Yacoub ShahinI scored excellent marks all because of their textbook solutions and all credit goes to crazy for study. The Principles of Measurement Systems Principles of Measurement Systems Solutions Manual Helped me out with all doubts. I would suggest all students avail their textbook solutions manual.

5out of 5DianaI scored excellent marks all because of their textbook solutions and all credit goes to crazy for study. The Solutions Manual Helped me out with all doubts. I would suggest all students avail their textbook solutions manual.

4out of 5Deyaneira GomezExcellent service when it comes to textbook solutions. The Solutions Manual. which I was looking for so long finally landed me here. My experience with crazy for the study was pretty good.

4out of 5SreeI am a student of college. My experience of textbook solutions with them was superb. They have a collection of almost all the necessary books and the Solutions Manual helped me a lot.

5out of 5adababeI scored excellent marks all because of their textbook solutions and all credit goes to crazy for study. The Helped me out with all doubts. I would suggest all students avail their textbook solutions manual.